很多人認為工字鋼是國內的叫法，H型鋼是國外的叫法，其實這個認知是錯誤的。H型鋼和工字鋼從形狀上來說是不一樣的，下面濟南型鋼廠家來講講H型鋼與工字鋼的區別和用途說明。

Many people think that I-beam is a domestic term and H-beam is a foreign term. In fact, this cognition is wrong. H-beam and I-beam are different from each other in terms of shape. Next, Jinan section steel manufacturer will talk about the differences and uses of H-beam and I-beam.

1、工字型鋼不論是普通型還是輕型的，由于截面尺寸均相對較高、較窄，故對截面兩個主軸的慣性矩相差較大，因此，一般僅能直接用于在其腹板平面內受彎的構件或?qū)⑵浣M成格構式受力構件。對軸心受壓構件或在垂直于腹板平面還有彎曲的構件均不宜采用，這就使其在應用范圍上有著很大的局限。

1. The moment of inertia of the two principal axes of the section is relatively different due to the relatively high and narrow section size of the I-shaped steel, whether it is ordinary or light, so it can only be directly used for members bent in the plane of its web or to form a lattice load-bearing member. It is not suitable for axial compression members or members with bending perpendicular to the plane of the web, which limits its application.

2、H型鋼屬于高效經濟截面型材(其它還有冷彎薄壁型鋼、壓型鋼板等)，由于截面形狀合理，它們能使鋼材更高地發揮效能，提高承裁能力。不同于普通工字型的是H型鋼的翼緣進行了加寬，且內、外表面通常是平行的，這樣可便于用高強度螺栓和其他構件連接。其尺寸構成合理系列，型號齊全，便于設計選用（除了吊車梁用工字型鋼） 。

2. H-shaped steel is an efficient and economical section profile (other cold-formed thin-walled steel, profiled steel, etc.). Because of the reasonable section shape, they can make the steel more efficient and improve the cutting capacity. What is different from the common I-shaped steel is that the flange of H-shaped steel is widened, and the inner and outer surfaces are usually parallel, which makes it easy to connect with other components with high-strength bolts. Its size composition is reasonable and its model is complete, which is convenient for design and selection (except for I-shaped steel for crane beam).

3、H型鋼的翼緣都是等厚度的，有軋制截面，也有由3塊板焊接組成的組合截面。工字鋼都是軋制截面，由于生產工藝差，翼緣內邊有1：10坡度。Ｈ型鋼的軋制不同于普通工字鋼僅用一套水平軋輥，由于其翼緣較寬且無斜度(或斜度很小)，故須增設一組立式軋輥同時進行輥軋，因此，其軋制工藝和設備都比普通軋機復雜。國內可生產的大軋制H型鋼高度為800ｍｍ，超過了只能是焊接組合截面。

3. The flange of H-beam is of equal thickness, with rolling section and combined section composed of three plates welded. All I-beams are rolled sections. Due to poor production technology, the inner edge of the flange has a 1:10 slope. The rolling of H-beam is different from that of ordinary I-beam with only one set of horizontal rollers. Because of its wide flange and no slope (or small slope), it is necessary to add a set of vertical rollers to roll at the same time. Therefore, its rolling process and equipment are more complex than ordinary rolling mill. The height of the large rolled H-shaped steel that can be produced in China is 800mm, which is more than the welded composite section.

4.工字鋼的邊長小，高度大，只能承受單方向的力。

4. The side length of I-beam is small and the height is large, and it can only bear the force in one direction.

5.H型鋼槽深，厚度大，可以承受兩個方向的力。

5. The H-shaped steel groove is deep and thick, and can bear the force in two directions.

6.隨著鋼結構建筑的發展需要，只有工字鋼是不行的，還要加厚工字鋼，用于承重柱容易失穩。

6. With the development of steel structure buildings, only I-beam is not feasible, and I-beam should be thickened, which is easy to lose stability when used for load-bearing columns.

7.工字鋼只能用于橫梁，而H型鋼才能用于結構的承重柱。

7. I-beams can only be used for beams, while H-beams can only be used for load-bearing columns of structures.

8.H型鋼是一種斷面力學性能較工字鋼優良的經濟型斷面鋼材，因其斷面的形狀與英文字母“H”相同而得名。熱軋H型鋼的翼緣比工字鋼寬、側向剛度大、抗彎能力強。同等規格下H型鋼理重較工字鋼輕。

8. H-shaped steel is an economic section steel with better mechanical properties than I-shaped steel. It is named because its section shape is the same as the English letter "H". The flange of hot-rolled H-beam is wider than that of I-beam, with large lateral stiffness and strong bending resistance. The weight of H-shaped steel is lighter than I-shaped steel under the same specification.

9.工字鋼翼緣是變斷面靠腹板部厚，外部?。籋型鋼的翼緣是等斷面。

9. The flange of I-beam is thick at the web of variable section and thin at the outside; The flange of H-shaped steel is of equal section.

H型鋼與工字鋼的區別和用途說明相關內容就講解到這里了，您對此有怎樣的疑惑或者需求就來我們網站http://m.95fjrc.com咨詢吧！

This is the difference between H-shaped steel and I-shaped steel and the use description. If you have any doubts or needs about this, please come to our website http://m.95fjrc.com Ask!